Flex Advance
Anti-Wear Hydraulic Lubricant
Available Viscosity Grade
ISO 32, 46, 68, 100, 150
PERFORMANCE FEATURES
- Outstanding thermal and oxidative stability leads to longer operating life and reduced deposit formation.
- Excellent low zinc anti-wear protection on pumps, bearings and other highly stressed components.
- Advance anti-foam additive to prevent foaming under severe operating loads.
- Exceptional water separation and hydrolytic stability means prolonged lubricant life.
- Superior pour point depressant effectively reduces power loss and warm up time, ensuring energy conservation.
SPECIFICATIONS
- AFNOR NF E48-690, NF E48-691
- ASTM D6158 HL, HM, HV
- Chinese standard GB 11118.1 L-HL & L-HM
- Cincinnati Machine P-68
- Cincinnati Machine P-69
- Cincinnati Machine P-70
- Danieli 0.000.001 Type 10 & 11
- Denison HF-0
- Denison HF-1
- Denison HF-2
- DIN 51524 Part 1, Part 2, Part 3
- Eaton Brochure 03-401-2010
- Eaton Lubricant Specification E-FDGN-TB002-E
- GM LS-2 Antiwear Hydraulic Oil
- ISO 11158 HL, HM, HV
- JCMAS HK P401
- SWEDISH STANDARD SS 155434:2015
- US Steel 126
- ZF TE-ML 07H
- ZF TE-ML 21M
*Please check OEM Specifications for suitability.
KEY PROPERTIES
| Available Grades | ASTM METHOD | AWS 32 | AWS 46 | AWS 68 | AWS 100 | AWS 150 |
|---|---|---|---|---|---|---|
| Specific Gravity @ 15°C | ASTM D-4052 | 0.864 | 0.865 | 0.865 | 0.878 | 0.889 |
| Viscosity, cSt @ 40°C | ASTM D-445 | 31.5 | 46.4 | 67.79 | 97.5 | 150 |
| Viscosity, cSt @ 100°C | ASTM D-445 | 5.4 | 6.85 | 9.12 | 11.3 | 14.7 |
| Viscosity Index | ASTM D-2250 | 105 | 102 | 100 | 98 | 97 |
| Flash Point (COC)°C | ASTM D-92 | 210 | 220 | 222 | 228 | 232 |
| Pour Point °C | ASTM D-97 | -33 | -30 | -27 | -21 | -15 |
| The above are typical properties of current production. While future production will conform to Forge’s specifications, variations in these characteristics may occur. | ||||||
Flex HV
Anti-Wear Hydraulic Lubricant with Viscosity Index Enhancer
Available Viscosity Grade
ISO 32, 46, 68, 100, 150
PERFORMANCE FEATURES
- Good filterabitiy characteristics (including the presence of water) enabling cost savings to be made from increase filter life and reduced maintenance.
- Exceptional water separation and hydrolytic stability that prolongs lubricant life, increase equipment reliability and reduced down time.
- Superior thermal and oxidative stability allowing longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
- Advance anti-foam additive to prevent foaming under severe operating loads.
- Addition of pour point depressant reduces power loss and warming up time, ensuring energy conservation.
SPECIFICATIONS
- AFNOR NF E48-690, NF E48-691
- ASTM D6158 HL, HM, HV
- Chinese standard GB 11118.1 L-HL & L-HM
- Cincinnati Machine P-68
- Cincinnati Machine P-69
- Cincinnati Machine P-70
- Danieli 0.000.001 Type 10 & 11
- Denison HF-0
- Denison HF-1
- Denison HF-2
- DIN 51524 Part 1, Part 2, Part 3
- Eaton Brochure 03-401-2010
- Eaton Lubricant Specification E-FDGN-TB002-E
- GM LS-2 Antiwear Hydraulic Oil
- ISO 11158 HL, HM, HV
- JCMAS HK P401
- SWEDISH STANDARD SS 155434:2015
- US Steel 126
- ZF TE-ML 07H
- ZF TE-ML 21M
*Please check OEM Specifications for suitability.
KEY PROPERTIES
| Available Grades | ASTM METHOD | 32 | 46 | 68 | 100 | 150 |
|---|---|---|---|---|---|---|
| Specific Gravity @ 15°C | ASTM D-4052 | 0.855 | 0.862 | 0.865 | 0.868 | 0.882 |
| Viscosity, cSt @ 40°C | ASTM D-445 | 31.6 | 44.5 | 66.1 | 99.6 | 145 |
| Viscosity, cSt @ 100°C | ASTM D-445 | 6.21 | 7.8 | 10.6 | 14.8 | 19.1 |
| Viscosity Index | ASTM D-2250 | 150 | 146 | 150 | 155 | 150 |
| Flash Point (COC)°C | ASTM D-92 | 200 | 212 | 210 | 230 | 232 |
| Pour Point °C | ASTM D-97 | -39 | -36 | -36 | -33 | -30 |
| The above are typical properties of current production. While future production will conform to Forge’s specifications, variations in these characteristics may occur. | ||||||
Flex Industrial Gear
Heavy Duty Industrial Gear Oil
Available Viscosity Grade
ISO 68, 100, 150, 220, 320, 460
PERFORMANCE FEATURES
- Exceptional resistant to rust and corrosion and possess good demulsibility.
- Helps to ensure smooth, trouble-free operation at high temperatures or in applications subject to water contamination.
- Superb protection from micro-pitting as well as high resistance to traditional scuffing wear.
- Protects gears and bearings in enclosed gear drives operating under extreme conditions of load, speed and temperature.
- Offers great resistance to degradation at high temperatures which helps extend oil life and drain intervals.
- Reduces overall oil consumption and maintenance costs.
SPECIFICATIONS
- AGMA 9005-E02
- DIN51517 Part 3 2004-01
- ISO 12925-1 CKC/CKD
- US Steel 224
*Please check OEM Specifications for suitability.
KEY PROPERTIES
| Available Grades | ASTM METHOD | 68 | 100 | 150 | 220 | 320 | 460 |
|---|---|---|---|---|---|---|---|
| Specific Gravity @ 15°C | ASTM D-4052 | 0.870 | 0.873 | 0.882 | 0.889 | 0.894 | 0.905 |
| Viscosity, cSt @ 40°C | ASTM D-445 | 68.6 | 100.3 | 151 | 226.4 | 333 | 480 |
| Viscosity, cSt @ 100°C | ASTM D-445 | 8.86 | 11.9 | 14.8 | 19.5 | 24.6 | 30.4 |
| Viscosity Index | ASTM D-2250 | 102 | 108 | 100 | 98 | 95 | 92 |
| Flash Point (COC)°C | ASTM D-92 | 216 | 240 | 238 | 240 | 242 | 258 |
| Pour Point °C | ASTM D-97 | -21 | -24 | -15 | -12 | -9 | -6 |
| The above are typical properties of current production. While future production will conform to Forge’s specifications, variations in these characteristics may occur. | |||||||
Flex Compressor
Industrial Compressor Oil
Available Viscosity Grade
ISO 32, 46, 68, 100, 150
PERFORMANCE FEATURES
- Outstanding oxidation stability which helps resist formation of harmful varnish and sludge caused by condensed engine vapour, dust and other particulate contaminants.
- Reduce deposits built up and extending service life.
- Excellent rust and corrosion protection, whereby internal components are protected from surface degradation, extending component life.
- Rapid release of foam and air, protecting components from aeration and cavitation damage, leading to reduced wear.
- Superior demulsibility which separates water from condensed vapour in reservoirs.
SPECIFICATIONS
- DIN 51506 VDL specifications
- Suitable for following type of compressors:
(1) Screw Compressor
(2) Piston and Reciprocating Compressor
(3) Vacuum Pump Compressor
(4) Airman
(5) Other Japanese Brand Compressor
*Please check OEM Specifications for suitability.
KEY PROPERTIES
| Available Grades | ASTM METHOD | 32 | 46 | 68 | 100 | 150 |
|---|---|---|---|---|---|---|
| Specific Gravity @ 15°C | ASTM D-4052 | 0.858 | 0.862 | 0.866 | 0.870 | 0.885 |
| Viscosity, cSt @ 40°C | ASTM D-445 | 32 | 46.3 | 65.6 | 99.5 | 148 |
| Viscosity, cSt @ 100°C | ASTM D-445 | 5.4 | 6.8 | 8.5 | 11.5 | 14.5 |
| Viscosity Index | ASTM D-2250 | 103 | 100 | 99 | 99 | 96 |
| Flash Point (COC)°C | ASTM D-92 | 218 | 226 | 230 | 240 | 242 |
| Pour Point °C | ASTM D-97 | -27 | -27 | -27 | -21 | -18 |
| The above are typical properties of current production. While future production will conform to Forge’s specifications, variations in these characteristics may occur. | ||||||
Flex Turbine
Industrial Turbine Oil
Available Viscosity Grade
ISO 32, 46, 68
PERFORMANCE FEATURES
- Superior oxidation, chemical and color stability.
- Extends oil change interval and help reduce oil replacement and disposal costs.
- Helps control deposit formation to help reduce filter plugging and equipment fouling for reducing downtime and maintenance costs.
- Prevents corrosion of critical oil system components for reducing maintenance and prolonging component life.
- Formulated for rapid water separation, excellent water demulsibility for quick air release that helps resist foam formation.
SPECIFICATIONS
- Alstom HGD 90117T
- ALSTOM HTGD 90117 (formerly ALSTOM NBA P 50001A)
- ANSI/AGMA 9005-D94 (R&O grades)
- BS 489
- Cincinnati Machine P-38/54/55/57 (HL)
- Cincinnati Machine P-39
- DIN 51506 (VDL)
- DIN 51515 Part 1 (TD)
- DIN 51515 Part 2 (TG)
- DIN 51517 Part 1/2 (C/CL)
- DIN 51524 Part 1 (HL)
- GE GEK 101941 A
- GE GEK 107395 A
- GE GEK 27070
- GE GEK 28568 A
- GE GEK 28143 B
- GE GEK 46506 D
- GE GEK 32568 F
- GM LJ-03/04/06/10-1-97
- GM LJ-03/04/06/10-2-97
- GM LS-01/02/03-1-97
- MAN Turbo SPD 10000242284
- MIL-PRF-17331 J
- MIL-PRF-17672 D
- Morgan Worchester Advanced Lubricant
- Morgan Worchester Standard Lubricant
- SEB 181 225
- SIEMENS TLV 9013
- SIEMENS TLV 901304
- SOLAR ES 9-224 (Class I/Class II )
- SOLAR ES 9-224W Class II
*Please check OEM Specifications for suitability.
KEY PROPERTIES
| Available Grades | ASTM METHOD | 32 | 46 | 68 |
|---|---|---|---|---|
| Specific Gravity @ 15°C | ASTM D-4052 | 0.862 | 0.865 | 0.870 |
| Viscosity, cSt @ 40°C | ASTM D-445 | 31.5 | 44.2 | 68.1 |
| Viscosity, cSt @ 100°C | ASTM D-445 | 5.62 | 7.09 | 9.75 |
| Viscosity Index | ASTM D-2250 | 116 | 118 | 122 |
| Flash Point (COC)°C | ASTM D-92 | 220 | 228 | 230 |
| Pour Point °C | ASTM D-97 | -18 | -18 | -18 |
| The above are typical properties of current production. While future production will conform to Forge’s specifications, variations in these characteristics may occur. | ||||